| |
| quality control equipment |
|
 |
 |
| Meter ruler |
tensile testing machine |
 |
 |
| Metal Material Testing Machine |
Vernier Caliper |
 |
 |
| Woven cloth warp and woof textile densitometer |
Mesh mirror |
|
HOW TO MEASURE WIRE CLOTH / WIRE MESH
 |
Coarse
Mesh / Wire Mesh
To measure wire cloth
(woven wire cloth, stainless steel
wire cloth, wire cloth screen, wire
cloth strainer, industrial wire cloth,
metal cloth, wire cloth) properly,
the mesh count should be taken in
both directions. On coarse meshes
(mesh wire, woven wire mesh, wire
mesh basket), this can be accomplished
by counting the number of openings
per linear inch measuring from wire
center to wire center. After taking
the first count, a second count should
be taken at a 90 degree angle to the
original measurement. The mesh count
of the cloth shown is 10x10. |
|
 |
Fine
Mesh / Wire Mesh
A mesh counter is
used to measure finer meshes of wire
cloth (woven wire cloth, stainless
steel wire cloth, wire cloth screen,
wire cloth strainer, industrial wire
cloth, metal cloth, wire cloth) accurately.
The fine mesh count is taken the same
way the coarse mesh is computed by
counting the number of openings per
linear in |
|
 |
Wire
Diameter
Wire diameter is
always checked with a micrometer caliper
as shown. Diameters of wires in both
directions should be checked. The
illustration shows .025 diameter wire. |
|
|
|
|
|
|
 |
| |
 |
Anping County Weian Wire Mesh Manufacture
Co.,Ltd
Address:Luzhuang Development Zone,,Anping County,Hengshui
City,Hebei,China
Tel:0086-0318-8555885
0086-0318-8555886
Fax:0086-0318-8555887
URL:www.makewiremesh.com
Email:weian@makewiremesh.com
|
|
|
 |
| |
|
